manual

1. Turn off radio.
2. While pressing and holding the FM2 or TP button (whichever is appropriate for your radio version), turn on radio.
3. The display will show a parameter that could be adjusted.
4. Turn the volume control knob to change the setting.
5. Press the FM2 or TP button to advance to the next adjustable parameter and you can use the volume knob in the same way. Repeat this until it cycles back to the first mode.
6. When you are done, turn off radio, the setting will be remembered the next time the radio is turned on.
7. The table below shows a list of parameters that can be adjusted in this manner.

SVC (or GALA) Speed-sensitive Volume Control (auto-volume compensation) effect
VOL Turn-on volume setting
SENS Station-scan sensitivity (DX/LOcal)
RM Radio Monitoring (whether radio should come on
while cassette is rewinding or fast-forwarding) (OFF/ON)
NAV Navigation system audio mute amount
TA Traffic Announcement volume
The volume of traffic announcements (independent of music volume). This is applicable to radios with this capability, and operated in an area with such a service.